Velox Plus Paint

Velox Plus antifouling paint

Velox Plus is an antifouling coating system developed to protect propellers, stern drives, shafts, outdrives, struts, jet pumps and other metallic parts immersed in the water. Velox Plus works because of excellent adhesion to metal below the waterline. A unique feature of Velox Plus is that it is not degraded by galvanic currents that are typically responsible for paint detachment. Using Velox Plus will keep your propeller clean, thus increasing fuel economy and boosting vessel performance. Approximately 60% cost savings compared to "non-stick" or "release" coatings.

Unlike current "release" coatings on the market, Velox Plus is repairable. No need to start over each time bare metals are exposed. Due to Velox Plus single part primer and no need for a catalyst, there is absolutely no rush, allowing you to take your time and giving yourself a quality application. No maximum time between coats or before launching, allowing you to have a flexible painting schedule. There is no waste either, remaining Velox Plus can be used during next haul out, saving you money. Velox Plus can be used on any size boat, from small yachts to large commercial vessels.

Velox Plus can be applied with a brush or sprayed on. DO NOT APPLY ONTO OTHER ANTIFOULING PAINTS. Velox Plus can be applied over an existing Velox Plus base coat. There are two sizes available (0.25 or 0.5 liter). Velox Plus is available in white, black or grey.

Velox Plus Application Instructions

Follow Us

Subscribe to Our Newsletter

* indicates required

Contact Us

  • U.S. Headquarters
  • 12532 Beverly Park Road
  • Lynnwood, WA 98087
  • Tel: 425-355-3669
  • Toll Free: 800-523-7558
  • Fax: 425-355-3661
  • Office Hours:
  • Monday - Friday, 7am - 4:30pm PST
  • European Headquarters
  • Zl du Capitou, 85 rue Louis Lepine,
  • 83600 Frejus - France
  • Tel: +33 4 94 53 27 70
  • Fax: +33 4 94 53 26 62
© PYI Inc. All Rights Reserved.